Atlanta Lease Wear and Tear Guide

LEASE MILEAGE AND WEAR 101-CHRYSLER CAPITAL LEASE 

It's important to know what to look for regarding mileage and wear before you turn in your vehicle. If you identify necessary repairs, we recommend ensuring all repairs are completed prior to your turn-in date. Keep in mind, some repairs may be covered under warranty or insurance. 

NORMAL EXTERIOR WEAR Cracks, scrapes, scratches, dings, dents, rust/corrosion and repairs » Individual instances of damage over two inches if the cost to repair does not exceed $100 » Scratches that can be buffed out during reconditioning » Single instances of damage two inches or less in diameter, excluding hail damage and punctures Glass windshield Cracks, stars or stone chips 1/2 inch or less in diameter Glass/Lenses: lights, turn signals and lamps Cracks two inches or less Tires » Tread of at least 4/32 inch when measured at the shallowest point » Tire type, size and brand must match and comply with manufacturer's recommendations Wheels » Scuffs or minor nicks to wheels or wheel covers

EXCESS EXTERIOR WEAR Structural/Unibody/Frame Absent or nonfunctional exterior parts are chargeable in all instances Cracks, scrapes, scratches, dings, dents, rust/corrosion and sub-par repairs THE WEAR TABLE » Excess overspray, conspicuous sand/grinding marks, uneven texture or poor color match greater than two inches in diameter » One or more occurrences of body, bumper or molding damage greater than two inches in size » Punctures or cracks to painted surfaces that will exceed $100 to repair » All substandard repair or damage that comprises the safety or structural integrity of the vehicle » Any defect that reduces market appeal or impairs vehicle appearance » Damaged chrome bumpers » Tow hitches not installed by FCA dealer DETERMINING WEAR The following pages include The Wear Table. Use this information in conjunction with The Wear Tool to assist in estimating vehicle damage, should you choose to complete a self-inspection prior to your final vehicle inspection. (An approved inspection is required before you turn in your vehicle.) "Get your vehicle inspected" is a brief video we created to provide an overview of the lease-end inspection process. Visit ChryslerCapital.com/Lease-end-options to view the video. Your vehicle's condition could be a determining factor in your lease-end decision process. 

NORMAL INTERIOR WEAR Burn holes Burn holes 1/8 inch or less in diameter Cuts, tears and singed areas Cuts, tears and singed areas 1/2 inch or less in diameter Stains Removable stains

EXCESS INTERIOR WEAR Missing equipment or broken parts » Any replacement equipment that does not meet manufacturer's specifications of comparable design, function and quality » Any absent equipment or damaged parts (including keys, key fobs, DVDs for the GPS system, DVD player headphones, DVD remote control, convertible boot, etc.) Burn holes Burn holes larger than 1/8 inch in diameter Cuts, tears and singed areas Tears, rips, cuts and singed areas exceeding 1/2 inch in diameter Stains Irremovable stains or any stain that requires replacement of upholstery or carpeting 

EXCESS EXTERIOR WEAR Glass windshield Damage greater than 1/2 inch in diameter or any hole Glass/Lenses: lights, turn signals and lamps Cracks exceeding two inches Mechanical/Electrical vehicle maintenance » Incomplete or subpar repairs » Any vehicle system/mechanical failure caused by noncompliance with manufacturer's recommended maintenance program » Broken or malfunctioning equipment » Any replacement component that fails to meet manufacturer's specifications Tires » Tires in any condition that represents a risk to driver/passenger's safety including cuts, sidewall plugs and gouges » Non-matching brands or improper tire sizes » Studded tires Wheels » Cracked, bent, mismatched or broken wheels or wheel covers » Wheels/wheel covers that are not original equipment or of equal quality, function and design Aftermarket modifications » Any modification to the vehicle's performance components, suspension or fuel system » Any change to paint color, non-factory paint scheme or wrapping » Engraved, etched or tinted glass that represents a risk to driver/passenger safety, is of poor quality or is outside legal regulations » Spray-on bed liners not installed by dealer » This list is for reference only and may not specify all  END-OF-LEASE CHECKLISTS If you want to turn in your vehicle… □ Chrysler Capital exclusive incentives □ Contact the Chrysler Capital Allegiance Team at 855.383.0558 to arrange for a pre-inspection on your vehicle. □ Check your mileage. □  Have the following items with you: - A copy of your Chrysler Capital Lease Agreement - All keys and keyless entry fobs and any other additions associated with


Make an Inquiry

By submitting your contact information, you consent to be contacted by telephone about purchasing a vehicle or obtaining vehicle financing. Clicking on the Submit button above is your electronic signature.

Hours

  • Monday 9:00 AM - 9:00 PM
  • Tuesday 9:00 AM - 9:00 PM
  • Wednesday 9:00 AM - 9:00 PM
  • Thursday 9:00 AM - 9:00 PM
  • Friday 9:00 AM - 9:00 PM
  • Saturday 9:00 AM - 9:00 PM
  • Sunday 11:00 AM - 6:00 PM

Contact

Landmark Chrysler Dodge Jeep RAM of Atlanta

5745 Peachtree Industrial Blvd.
Directions Atlanta, GA 30341

  • Sales: (678) 942-6933
  • Service: (678) 894-7887
  • Parts: (678) 894-7954
`